Sanyo SCP 4900 - Manual (Page 67)

Reviewing Voice Dialing Tags
1. From the Standby mode, press to display the main menu.
2. Highlight VoiceService and press .
3. Highlight Voice Dial and press .
4. Highlight Review or Review: Speaker and press .
5. Highlight the desired entry and press .
or
Highlight the desired entry and press
(right softkey).
Highlight Play and press .
ᮣ Highlight Erase at the step 5 above, and then select Yes to erase voice
dial tag.
Erasing All Voice Dial Tags
To erase all voice dial tags:
1. From the Standby mode, press to display the main menu.
2. Highlight VoiceService and press .
3. Highlight Voice Dial and press .
4. Highlight Erase All and press .
5. Highlight Yes and press .
Recording Memos
To record a memo in Standby mode:
1. Press and hold (side of the phone) or . Starts recording
after the beep.
OR
1. From the Standby mode, press to display the main menu.
2. Highlight VoiceService and press .
3. Highlight Voice Memo and press .
4. Highlight Record and press .
5. Start recording after the beep.
Options
Section 2: Understanding Your Phone
2I: Using Your Phone’s Voice Services 123
Using Voice-Activated Dialing
In addition to PCS Voice Command SM (see pages 169-171), you can use a
Voice Dial tag to automatically dial a phone number in your Internal
Phone Book. Your phone can store up to 30 Voice Dial tags.
(To create a Voice Dial tag, see “Programming Voice Dial Tag to Your
Phone” on page 122.)
To use a Voice Dial tag to call a phone number:
1. From the Standby mode, press or shortly.
2. Follow the voice prompts and recite the entry’s Voice Dial tag into your
phone’s microphone.
Note: Record Voice Dial tags in a quiet environment and without the aid
of an accessory (for example, a headset or Hands-Free Car Kit).
Programming Voice Dial Tag to Your Phone
To program a voice dial tag:
1. From the Standby mode, press to display the main menu.
2. Highlight VoiceService and press .
3. Highlight Voice Dial and press .
4. Highlight Program and press .
5. The phone will prompt you to say the name you want to program.
Wait for the beep and then say the name.
6. Respond to the prompt by repeating the name after the beep.
7. Enter or highlight the entry (name) in the phone book entry list.
8. Press .
9. Select the labeled category that includes your desired phone number.
Then display shows “Voice Dial Recorded”.
Section 2: Understanding Your Phone
122 2I: Using Your Phone’s Voice Services