Sanyo SCP 4900 - Manual (Page 38)

To Answer Incoming Roaming Calls With Call Guard On:
1. Press or .
2. Press to proceed while the pop-up message is displayed.
OR
1. Press , highlight Answer or Answer: Speaker and press .
Remember if the Call Guard feature is set to On , you need to take extra
steps to make and receive roaming calls even if you have selected the
Analog setting (see page 63).
Section 2: Understanding Your Phone
2D: Controlling Your Roaming Experience 65
Controlling Roaming Charges Using Call Guard
In addition to the roaming icon, Call Guard alerts you when roaming
charges apply. This feature makes it easy to manage your roaming
charges by reminding you when you make or receive roaming calls. It
also requires you to take additional steps before placing or answering a
roaming call. These additional steps are not required when you make or
receive calls while on the enhanced Sprint Nationwide PCS Network.
To Turn the Call Guard Feature On or Off:
1. From the Standby mode, press to display the main menu.
2. Highlight Settings and press .
3. Highlight Roaming and press .
4. Highlight Call Guard and press .
5. Select On or Off and press .
Note: Voice Dialing and Speed Dialing are not available when you are
roaming with Call Guard enabled.
To Place Roaming Calls With Call Guard On:
1. From the Standby mode, dial 1 + area code + the seven-digit number.
(You can also initiate a call from the Internal Phone Book, Call History
or Messaging.)
2. Press or or press , highlight Call or
Call: Speaker On and press .
3. Press to proceed while the pop-up message is displayed.
or
Press any key to erase the pop-up message, then press , highlight
Roam Call or Roam: Speaker On and press .
Section 2: Understanding Your Phone
64 2D: Controlling Your Roaming Experience