Sony SRP-X700P - Manual (Page 4)

– 4 –
Command Reference
Basic Control Commands
The group of the Basic Control Commands contains 12 commands that enable you to perform the basic operations such as changing the
sound volume, switching the LINE4 SELECTOR of the SRP-X700P and others.
CONTROL S: 43[H] 52[H] 43[H] 53[H] (‘CRCS’)
This command is used to control an external equipment that is connected to the CONTROL S terminal of the SRP-X700P.
• Packet format
43[H] 52[H] 43[H] 53[H] “parameter” 0D[H]
• Parameter
The parameter consists of the two-byte data in the following order.
• Channel
Specify the equipment to which you want to send the command.
When LINE 4 INPUT is specified, a remote command is sent to the channel that is currently selected by LINE 4 input.
byte Parameter name
1st CHANNEL
2nd REMOTE COMMAND
CHANNEL
LINE 3 INPUT 31[H] ( ‘1’ )
LINE 4A INPUT 32[H] ( ‘2’ )
LINE 4B INPUT 33[H] ( ‘3’ )
LINE 4C INPUT 34[H] ( ‘4’ )
LINE 4D INPUT 35[H] ( ‘5’ )
LINE 4E INPUT 36[H] ( ‘6’ )
LINE 4F INPUT 37[H] ( ‘7’ )
LINE 4 INPUT 38[H] ( ‘8’ )