SUPER MICRO Computer SUPERSERVER 6015B-3 - Manual (Page 133)

Appendix D: Adaptec HostRAID Setup
D-17
To format a disk:
Note: The operation of Formatting Disk allows you to perform a low-level formatting
of a hard drive by writing zeros to the entire disk. Serial ATA drives are low-level
formatted at the factory and do not need to be low-level formatted again.
3. When the screen shown below displays, select Format Disk and press .
The following screen appears:
4. Read the warning message when it appears in the screen as shown below. To
continue with disk formatting, select Yes and hit . Otherwise, select No
and press .
Caution: Formatting a disk destroys all data on the drive. Be sure to back up your
data before formatting a disk.