SUPER MICRO Computer SUPERSERVER 6015B-3 User Manual
Page 113
Appendix C: ESB2 HostRAID Setup
C-7
Creating a RAID 5 Set (Parity)
a. Select "Create RAID Volume" from the main menu and press the
The following screen will appear:
b. Specify a name for the RAID 5 set and press
c. When the Raid Level is highlighted, use the
select RAID 5 (Parity) and hit
d. When the Disk item is highlighted, press
as RAID. The following pop-up screen (See Note on Page C-3) displays:
e. Use the
to select it. A triangle appears to confi rm the selection of the drive.
f. Use the
4 KB to 128 KB for the RAID 5 array, and hit
use a lower stripe size, and for a multimedia system, use a higher stripe size. The
default stripe size is 128 KB.)
g. Enter your desired RAID volume capacity and press
item is highlighted. The default setting is the maximum capacity allowed.
h Press Enter when the Create Volume item is highlighted. A warning message
displays.
i. When asked "Are you sure you want to create this volume (Y/N), press "Y" to
create the RAID volume, or type "N" to go back to the Create Volume menu.