Samsung BP59-00134G-01 - Manual (Page 30)

2-15 Installation and Connection
2-15 Connecting an AV device using a D-Sub cable
First, Make sure that the AV device and your projector are turned off.
1. Connect the [PC IN] terminal at the back of the projector to the D-Sub terminal of your AV device using a D-Sub cable.
- For supported input signal formats, resolutions, and frequencies, see AV Timing (D-Sub) in Section 2-9.
2. Connect the [PC/DVI AUDIO IN] terminal at the back of the projector to the Audio out terminal of your AV device using an
audio cable (Not supplied).