Sharp XL-E80 - Manual (Page 31)

31
XL-E80
Re
fe
re
nces
Specifications
As part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product
improvement without prior notice. The performance specification fig-
ures indicated are nominal values of production units. There may be
some deviations from these values in individual units.
! General
! Amplifier
! Tuner
! CD player
! Cassette deck
! Speaker
Power source AC 120 V, 60 Hz
Power consump-
tion 83 W
Dimensions Width: 6-5/16" (160 mm)
Height: 9" (228 mm)
Depth: 9-13/16" (248 mm)
Weight 8.4 lbs. (3.8 kg)
Output power 20 watts minimum RMS per channel into 6
ohms from 100 Hz to 20 kHz, 10% total har-
monic distortion
Output terminals Speakers: 6 ohms
Headphones: 16 - 50 ohms (recommended:
32 ohms)
Subwoofer pre-output: 500 mV/47 kohms
Input terminals Video/Auxiliary (audio signal): 500 mV/47 k
ohms
Frequency range FM: 87.5 - 108 MHz
AM: 530 - 1,720 kHz
Type Compact disc player
Signal readout Non-contact, 3-beam semiconductor laser
pickup
D/A converter 1-bit D/A converter
Frequency re-
sponse 20 - 20,000 Hz
Dynamic range 90 dB (1 kHz)
Frequency re-
sponse 50 - 14,000 Hz (normal tape)
Signal/noise ratio 50 dB (recording/playback)
Wow and flutter 0.25 % (WRMS)
Type 2-way type speaker system
Super tweeter
3-9/16" (9 cm) woofer
Maximum input
power 40 W
Rated input power 20 W
Impedance 6 ohms
Dimensions Width: 5-3/16" (132 mm)
Height: 9" (228 mm)
Depth: 7" (177 mm)
Weight 4.0 lbs. (1.8 kg)/each