Sharp XL-E80 - Manual (Page 17)

17
XL-E80
CD
or MP3
disc Pla
ybac
k
! Direct search of the track
By using the direct search buttons, the desired tracks can be played.
Notes:
" A track number higher than the number of tracks on the disc can-
not be selected.
" During random play, direct search is not possible.
" When playing MP3 discs, you can display the track number but
cannot select the folder by pressing the direct search button(s).
! Repeat play
All tracks or a programmed sequence can be continuously repeated.
To cancel repeat play:
Press the REPEAT button again. " " will go out.
Caution:
After performing repeat play, be sure to press the button. Other-
wise, the disc will play continuously.
! Random play
The tracks can be played in random order automatically.
To cancel random play:
While in the stop mode, press the RANDOM button again.
Notes:
" Random play will stop automatically when all tracks are played
once. (The same track will not be played back twice.)
" In random play, the unit will select and play tracks automatically.
(You cannot select the order of the tracks.)
" If you press the button during random play, you can move to
the next track by the random operation. On the other hand, the
button does not allow you to move to the previous track. The
beginning of the track being played will be located.
Use the direct search buttons on
the remote control to select the de-
sired track.
Selected track number
" The direct search buttons allow you to select up to number 9.
" When selecting number 10 or higher, use the "+10" button.
A. For example, to choose 13
1 Press the "+10" button once.
2 Press the "3" button.
B. For example, to choose 30
1 Press the "+10" button three times.
2 Press the "0" button.
Playback of the selected track is started. When the last track on
the disc has finished playing, the unit will stop automatically.
To repeat all tracks:
1 Press the REPEAT button on the re-
mote control.
2 Press the ( ) button.
To repeat a desired track:
1 Perform steps 1 - 3 in the "Programmed play" section on page 18
and then press the REPEAT button.
2 Press the ( ) button.
To repeat random play:
Press the REPEAT button during random play.
While in the stop mode, press the
RANDOM button on the remote con-
trol and the (
) button sequen-
tially to begin random play.