Sharp XL-E80 - Manual (Page 15)

15
XL-E80
CD
or MP3
disc Pla
ybac
k To stop playback:
Press the button.
To remove the disc:
While in the stop mode, press the OPEN/CLOSE button.
Caution:
" Do not place two CDs in one disc tray.
" Do not play discs with special shapes (heart- or octagon-shaped)
as it may cause malfunctions.
" Do not push the disc tray while it is moving.
" If the power fails while the tray is open, wait until the power is
restored.
" If a disc is damaged, dirty, or loaded upside down, the disc will
skip or not play.
" Subjecting the unit to shock or vibration may cause mistracking.
" If TV or radio interference occurs during CD operation, move the
unit away from the TV or radio.
! To change the display (MP3 discs only)
While in the stop mode or playback mode, press the MP3 DISPLAY
button.
Each time the button is pressed, the display will change as follows.
[When in the stop mode]
[When in the playback mode]
To interrupt playback:
Main unit operation:
Press the
button.
To resume playback from the same
point, press the
button again.
Remote control operation:
Press the button.
To resume playback from the same point, press the button.
Total number of tracks
Folder name
Track name
Track number Elapsed playback
time
Folder name
Track name