Sharp XL-E80 - Manual (Page 14)

14
XL-E80
CD
or MP3
disc Pla
ybac
k
Listening to a CD or MP3 disc
This system can play audio CD, CD-R and CD-RW discs, but cannot
record.
Some audio CD-R and CD-RW discs may not be playable due to the
state of the disc or the equipment used for recording.
MP3 is a form of compression. It is an acronym which stands
for MPEG Audio Layer 3.
MP3 is a type of audio code which is processed by significant
compression from the original audio source with very little loss
in sound quality.
Notes:
" Due to the structure of its disc information, it takes longer to read
an MP3 disc than a normal CD.
" "MP3" indicator will light up if an MP3 disc is initialized.
" This system supports MPEG 1 Layer 3, MPEG 2 Layer 3, and
VBR files.
" During VBR file playback, time counter in the display may differ
from its actual playback time.
1 Press the ON/STAND-BY button to turn the power on.
2 Press the FUNCTION button until "CD" appears on the dis-
play.
When operating with the remote control, press the CD button.
3 Press the OPEN/CLOSE button to open the disc tray.
4 Place the disc on the disc tray, label side up.
Be sure to place 3" (8 cm) discs in the middle of the disc posi-
tions.
5 Press the OPEN/CLOSE button to close the disc tray.
6 Press the ( ) button to start playback from track 1.
When the last track on the disc has finished playing, the unit will
stop automatically.
5" (12 cm) 3" (8 cm)
[MP3] [CD]
MP3 disc indicator
Total number
of tracks Total number
of tracks Total playing
time
Disc play indicator