Sennheiser 500 Series - Manual (Page 25)

Using the devices
23
Muting the audio signal or deactivating the RF signal
EM 500
To mute the audio signal:
To unmute the audio signal:
SK 500
The MUTE switch
·
allows you to mute the audio signal or to deactivate the RF signal. Via the
“ Mute Mode ” menu item, you can set the desired function of the MUTE switch
·
:
̈
From the “ Mute Mode ” menu item, select the desired setting (see page 28).
̈
Exit the operating menu.
̈
Slide the MUTE switch
·
to the left, to the position MUTE .
The bodypack transmitter reacts as indicated in the table.
The current state of the muting function or the RF signal is displayed on the display panel of
the bodypack transmitter. An additional display appears on the receiver’s display panel when
the pilot tone function is activated on both bodypack transmitter and receiver and, in addi-
tion, this display has been activated via the “
Warnings ” menu item on the receiver (see
page 27).
̈
When one of the standard displays is shown on the display panel, press the
STANDBY button.
“ RX Mute On? ” appears on the display panel.
̈
Press the jog dial.
The audio signal is muted. “
RX Mute ” appears in alternation with the current
standard display.
̈
Press the STANDBY button.
“ RX Mute Off? ” appears on the display panel.
̈
Press the jog dial.
The muting is canceled.
Setting Slide the MUTE switch
· ...
Function
“ Disabled ” ... to the left (position MUTE ) None
“ RF On/Off ” ... to the left (position MUTE ) Deactivates the RF signal
(offline operation)
... to the right Activates the RF signal
(online operation)
“ AF On/Off ” ... to the left (position MUTE ) Mutes the audio signal
... to the right Unmutes the audio signal
·
MHz 543.200
ew500 G3
MUTE P
AF
ብ
ቨ