Skm 500 radio microphone – Sennheiser 500 Series User Manual
Page 22
Using the devices
20
To
activate
the
RF signal
:
SKM 500 radio microphone
To switch the radio microphone
on
(online operation):
To switch the radio microphone
off
:
̈
If necessary, deactivate the lock mode (see page 22).
To switch the radio microphone
on
and to
deactivate the RF signal on switch-on
(offline oper-
ation):
Use this function to save battery power or to prepare a bodypack transmitter for use
during live operation without causing interference to existing transmission links.
̈
Briefly press the
ON
/
OFF
button
.
“
RF Mute Off
” appears on the display panel.
̈
Press the
SET
button
¶
.
The transmission icon
ብ
is displayed again.
̈
Briefly press the
ON
/
OFF
button
¹
.
The radio microphone transmits an RF signal. The transmission icon
ብ
is
displayed.
The red
ON
LED
¾
lights up and the standard display “
Frequency/Name
”
appears on the display panel.
You can switch the radio microphone on and
deactivate the RF signal on switch-on
.
For more information, see below.
̈
Press the
ON
/
OFF
button
¹
until “
OFF
” appears on the display panel. The red
ON
LED
¾
goes off and the display panel turns off.
When in the operating menu, pressing the
ON
/
OFF
button
¹
will cancel your entry
(ESC function) and return you to the current standard display.
̈
Press the
ON
/
OFF
button
¹
until “
RF Mute On?
” appears on the display panel.
SET
SET
¹
¾
ON/OFF
ON/OFF
SET