Sennheiser 500 Series - Manual (Page 18)

Putting the devices into operation
16
SKM 500 radio microphone
Inserting the batteries/accupack
For powering the radio microphone, you can either use two 1.5 V AA size batteries or the
rechargeable Sennheiser BA 2015 accupack.
̈
Unscrew the lower part of the radio microphone from the radio microphone’s body
»
by
turning it counterclockwise.
̈
Slide back the lower part of the radio microphone as far as it will go.
̈ Open the battery compartment cover Ƹ .
̈ Insert the batteries or the BA 2015 accupack as shown on the battery compartment
cover. Observe correct polarity when inserting the batteries/accupack.
̈
Close the battery compartment cover
Ƹ
.
̈
Push the battery compartment into the radio microphone’s body.
̈
Screw the lower part of the radio microphone back to the radio microphone’s body
»
.
Charging the accupack
To charge the radio microphone with the inserted BA 2015 accupack (optional accessory):
̈
Use the LA 2 charging adapter to insert the radio microphone into the L 2015 charger
(both the charger and the charging adapter are available as optional accessories).
Changing the microphone head
The microphone head is easy to change.
̈
Unscrew the microphone head.
»
When unscrewing the radio microphone during operation, the muting function is
automatically activated. “
MUTE ” appears on the display panel.
When screwing the lower part of the radio microphone back to the radio micro-
phone’s body, the muting is canceled.
Ƹ Ƹ
³