Sanus Systems VMFL1 - Manual (Page 6)

ENGLISH
Step 6: Attach Monitor Bracket to Wall Plate
Lift the TV up so the two hooks on the Monitor Bracket (b) align with the slits on the top of the Wall Plate (a). See the Detailed View of
Diagram 6 for assistance. Ensure the Monitor Bracket and Wall Plate are secured together by the top two hooks.
Note: Do not tighten Locking Bolts (h) at this point!
Diagram 6 Detailed View
hook
b
wall
tab
h
a
Step 7: Cable hook up and lock Monitor Bracket to Wall Plate
To allow for greater space between the wall and your display to install cables, allow the display to hang from the two top hooks on the
Monitor Bracket (b) with the bottom tabs free to move as shown in Diagram 7a. Once all cables are installed, make sure the top two
hooks and the bottom two tabs are engaged with the wall plate. See the Detailed View of Diagram 7b. Proceed to tighten the M5 Locking
Bolt (h) so the Monitor Bracket is secured to the Wall Plate.
Diagram 7a Diagram 7b Detailed View
a h
TV
b
l
wall