beautypg.com

Sanus Systems JFBD1 User Manual

Assembly instructions for model: jfbd1

background image

Supplied Parts and Hardware

Sanus Systems makes every effort to assure all necessary hardware is included. Check carefully to make sure that there

are no missing or defective parts. Never use defective parts. If hardware is missing or damaged, contact Sanus Systems or

consult your local hardware store. Contact Sanus Systems before returning products to the point of purchase. Replacement

parts for products purchased through authorized dealers will be shipped directly to you.

Threaded fasteners are shown actual size.

Required Tools: Phillips screwdriver, drill, and a 5/16″ diameter drill bit

NoTe

If you purchased the Java JFV65 Lowboy prior to buying the JFBD1, you may need the Sanus JFRU Update

Kit to properly assemble your furniture. Look for two sets of threaded inserts on both sides of the back of

the Lowboy as shown in Figure 2. If no inserts are present, contact Sanus Customer Service.

Assembly Instructions for Model: JFBD1

Thank you for choosing the Java Furniture Line from Sanus Systems. The JFBD1

joins to Java Furniture Model JFV65 and serves as a backdrop for mounting

Sanus Wall Mount models VMPL50, VMPL250, VMPL, VMPL2, or VMPL3.

wARNINg

Do not use this product for any purpose that is not explicitly

specified by Sanus Systems. Improper installation may cause

property damage or personal injury. If you do not understand these

directions or have any doubts about the safety of the installation,

call a qualified contractor or contact Sanus at 800.359.5520 or

www.sanus.com. Sanus Systems can not be liable for damage

or injury caused by incorrect mounting, incorrect assembly, or

incorrect use.

CAUTIoN

The combined weight of your television and wall mount must not

exceed 130 lb (59 kg).

Sanus Systems 2221 Hwy 36 West, Saint Paul, MN 55113 09.27.06 (6901-100104)

Customer Service: 800.359.5520. See complementary Sanus products at www.sanus.com

Top Backboard – A

Qty 1

Bottom Backboard – B

Qty 1

M8 x 40 mm Screw – D

Qty 4

Backboard Joining Plate – C

Qty 4

¼-20 x 0.5″ Screw – E

Qty 24

¼″ Lock Washer – F

Qty 24