Configuration screens – SMC Networks 802.11g User Manual

Page 11

SMCWAA-G EZ-Stream™ 802.11g

Wireless Audio Adapter

Here is a typical Play Screen display:

The icons to left and right of the display provide information about the network connection and the audio buffer level
respectively. The left-hand icon shows the signal strength as a vertical bar, when using a wireless LAN connection, or is just
the word LAN, if the SMCWAA-G is using wired ethernet. The buffer icon normally shows a full-height bar, indicating a full
buffer. The height of the bar may vary, but if it falls to zero, the connection will be lost, and you will have to connect again. This
should never happen with local sources (networked PCs), but some Internet Radio stations can be unreliable.

Notes:

Any station, album or track information that will not fit in the display width will scroll horizontally.

If scrolling stops, you can start it again by pressing the INFO key (

) twice.

While the station is playing, the play icon ( ) is displayed, At any time, you can press the

button to pause a track, or

mute a radio station. The pause icon (||) is then shown, until you press the

button again or stop the track/station. To stop

a track, or disconnect a radio station, either press the stop key (

) or select a new track/station.

You can adjust the playback volume with the increase (

) and decrease (

) keys. A horizontal bar display shows the

volume level as you are changing it, and returns a few seconds later to the Play Screen. You can switch the sound off, without

pausing a track or disconnecting a radio station, by pressing the Mute (

) button. Press the Mute button again to switch the

sound on again.

Press the INFO key (

) to return to last Select Screen, where you can prepare your next track or station, or press

start again at the Home Menu. The current track/station will continue to play until the end, or until you select something else

(or change the active Profile). Press

at any time to return to the Play Screen.

Note: For more features you can use while playing music, see Listening to Music on page 12.

Configuration Screens

When first powered up, and whenever you press the SYSTEM key (

), the SMCWAA-G enters the Configuration Mode.

The top level Configuration Menu looks like this:

This mode uses Select screens in the same way as the Browse Mode. When an item is selected for reconfiguration, its

name becomes the title of the next menu screen and the

icon appears on the left, to show that you can return to the

previous menu by pressing the

key.

0 8 - J u l - 2 0 0 5 1 5 : 0 2

D i g i t a l l y I m p o r t e d M o s t l y

V i v a l d i – 4 S e a s o n s

0 7 : 2 1

D e v i c e S t a t u s

I n t e r n e t R a d i o

C o n f i g u r a t i o n W i z a r d

C o n f i g u r a t i o n

2 / 7