Charge battery, Getting started – Siemens CL50 User Manual
Page 8
13.1.03
Dinghy-ger.fm
DINGHY, Int English, A31008-H6900-A4-3-7619
7
Getting Started
Charge battery
The battery is not fully charged
when delivered, so:
• Plug in charger cable at the bot-
tom of the phone.
• Plug in the power supply unit to
the main power socket (charge for
at least two hours).
If the battery is totally discharged, no
charge icon is displayed at the beginning of
the charging process.
If this is the case, leave the charger cable
plugged in. The charge icon will appear af-
ter a maximum of 2 hours. The battery is
then automatically charged.
Functions without SIM card
The phone is switched on without
the SIM card:
§Menu§
Press soft key.
All the functions that can be used
without the SIM card are displayed.
You will find a description of the
functions in this user guide.
§SOS§
Emergency number,
Charging
The following is shown at the top of the dis-
play on front and on the right of the outer
display:
g
When charging is in progress.
e
End of charging.
An empty battery is fully charged after
about 2 hours. Charging is only possible in
an ambient temperature of 5 °C to 40 °C
(the charge icon flashes as a warning when
the temperature is 5 °C above/below).
The voltage specified on the power supply
unit must not be exceeded.
Standby time
A fully charged battery provides up to
220 hours of standby time or up to 270 min-
utes of talk time. The standby times/talk
times are average values and depend on
the operating conditions (see table below).
Charge level display:
Full
a
b
c
Empty
A beep sounds when the battery is nearly
empty.
Operation carried
out
Time
(min)
Decrease of
standby time
Calling
1
30 to 60 minutes
Display back
light *
1
30 minutes
Network search 1
5 to 10 minutes
* key input, games, organiser etc.