Siemens CL50 - Manual (Page 12)

13.1.03 Dinghy-ger.fm DINGHY, Int English, A31008-H6900-A4-3-7619
11
Making a phone call
Dialling with number
keys
Open the phone so that the key-
board is accessible. If the phone is
not already on (in standby mode)
hold down the
S
key (on/off).
To dial a number, the phone must be
switched on (standby mode).
J
Enter the number (al-
ways with prefix, if nec-
essary with international
dialling code).
§Clear§ A short press
clears the last digit, a
long press clears the en-
tire number.
º
Store phone number
in the Addressbook (p. 16)/
Phonebook (p. 20).
A
Press the Call key. The
phone number displayed
is dialled.
International dialling codes
Many international dialling codes are stored
in your phone:
0
Hold down until a "+" symbol
appears. This replaces the
first two digits of the interna-
tional dialling code.
§+ List§ Press.
Select the required country. The internation-
al dialling code is displayed. Now add the
national number (in many countries without
the first digit if it is a zero) and press the Call
key.
End call
S
Press the End key brief-
ly. The call is ended.
Accept call
The phone must be switched on
(standby mode).Open the phone
and
§Reply§ Press or
A
press.
Press this key even if the person on the
other end of the line has hung up first.
If the function "Flap answer" is activated
(p. 63), a call can be accepted by simply
opening the flap (cover).
If the headset is connected calls can be ac-
cepted by simply pressing the top arrow on
the button at the side of the phone.
< a
+498912345
Reply Reject