beautypg.com

Getting started, Insert sim card/battery – Siemens CL50 User Manual

Page 7

background image

6

13.1.03

Dinghy-ger.fm

DINGHY, Int English, A31008-H6900-A4-3-7619

Getting Started

Insert SIM card/battery

The service provider supplies you

with a SIM card on which all the im-

portant data for your line is stored. If

the SIM card has been delivered in

credit-card size, snap the smaller

segment out and remove any rough

edges.
• Press latch

then slide out and

lift up the cover .

• Insert SIM card in the opening and

push gently until it engages.

(make sure the angled corner is in

the correct position, contacts

pointing downwards).

• Insert battery into the phone side-

ways , then press downwards

, until it engages.

• Insert cover as shown . Then

press downwards until it engages

.

Only 3 V SIM cards are supported. Older

SIM cards (5-volt technology) cannot be

used. Please contact your service provider

if you have an older card.

Your phone's display and the display cover

of the upper case are delivered with a pro-

tective film. Remove this film before getting

started. In rare cases the static charge cre-

ated by removing this film may cause dis-

coloration at the edges of the display. How-

ever, this will disappear within 10 minutes.