Reject call, When number is busy, Auto redial – Siemens CL50 User Manual
Page 13: Redial previous numbers, Making a phone call
12
13.1.03
Dinghy-ger.fm
DINGHY, Int English, A31008-H6900-A4-3-7619
Making a phone call
Reject call
§Reject§
Press or
S
press briefly.
When number is busy
If the number called is busy or it can-
not be reached because of network
problems, the following options are
available (depending on the service
provider):
Auto redial ?
§Yes§
Press. The number is
automatically dialled for
up to 15 minutes at
increasing intervals.
During this period, no
other number can be
dialled. To end:
S
End key.
§No§
Press.
§Transfer§
Diverts the caller e.g. to the
mailbox if
Busy
is set (p. 44)
and "call waiting" (p. 13) has
been activated.
If no key is pressed the call is automatically
ended after a few seconds.
Redial previous numbers
To redial the phone number last
called:
A
Press the Call key
twice.
To redial other numbers that were
dialled previously:
A
Press the Call key once.
B
Pick out the required
phone number from the
list, then press ...
A
... to dial.
§Options§
Call lists (p. 42).
Store phone number in the
Addressbook (p. 16)/Phone-
book (p. 20).
The numbers of calls that have been re-
ceived, dialled or missed are stored for call-
back purposes (p. 42).
An incoming call will interrupt any other use
of the phone.
Functions during the call (p. 13).
Switch off ringer for the current call (but not
if „Any key “, p. 63, is active):
*
Hold down.
The call is displayed. The caller hears the
dialling tone.