Smart Technologies Smart Board V280 - Manual (Page 68)

58 | MAINTENANCE AND TROUBLESHOOTING
There is a small red ×
on the SMART Board
icon .
(continued)
The camera calibration
data is lost. Restore the back-up camera data
from the registry.
To restore the back-up camera
data:
1. In the Windows notification
area, select the SMART
Board icon , and then select
Control Panel.
The SMART Notebook control
panel opens.
2. Select About Software and
Product Support > Tools >
Diagnostics.
The SMART Board
Diagnostics window opens.
3. Select Default (or Restore
Camera Defaults) to restore
the camera data.
4. Close the SMART Board
Diagnostics window, and then
close the SMART Notebook
control panel.
NOTE
The Connection Wizard
enables the Restore Camera
Defaults button if both
cameras are detected but
your interactive whiteboard
isn’t detected.
Symptoms Cause Solution