Smart Technologies Smart Board V280 - Manual (Page 4)

ii | IMPORTANT INFORMATION
• Do not mount your SMART Board V280 interactive whiteboard on an FS670
or FS570 floor stand. These floor stands do not provide the correct locking
mechanisms to properly secure your interactive whiteboard. Using these
stands could result in personal injury and product damage.
• Move your floor stand-mounted SMART Board interactive whiteboard
with care. Quick stops, excessive force and uneven surfaces might cause
your product to overturn.
• Do not stand (or allow children to stand) on a chair to touch the surface
of your SMART product. Instead, remount your product at the appropriate
height, or use an FSV280 height-adjustable floor stand.
• Do not climb (or allow children to climb) on your wall- or
stand-mounted SMART Board interactive whiteboard.
Climbing on your interactive whiteboard or projector boom
could result in personal injury or product damage.
CAUTIONS
•
Avoid exposing your SMART product to extreme heat or cold. SMART Board
V280 interactive whiteboards can operate in the temperature range of
41°F to 95°F (5°C to 35°C) with up to 80% humidity (non-condensing).
The shipping and storage temperature range is from -40°F to 120°F
(-40°C to 50°C).
• Do not lean your interactive whiteboard against a wall. Your interactive
whiteboard’s frame and pen tray brackets are not designed to continuously
sustain the product’s weight. Make sure that you carefully place it face down
on a clean, flat surface instead.
• To ensure a safe installation and to prevent your interactive whiteboard
from being accidentally knocked off the wall, make sure that you secure your
interactive whiteboard to the wall with the included wall anchors and screws.
• Use only the screws included with your SMART Board V280 interactive
whiteboard. Using other screws might damage your product.
• Do not let the top of your interactive whiteboard contact the wall because the
caps covering the interactive whiteboard’s DViT™ (Digital Vision Touch)
cameras could be damaged.
• Do not add any extra weight or excessive pressure to your wall-mounted
interactive whiteboard or its pen tray. SMART designed the wall mounting
bracket to support only the weight of your interactive whiteboard during
normal use.