Samsung ML-1250 - Manual (Page 45)

P
RINT
M
EDIA
4.11
Printing on Transparencies
Guidelines
• Only use transparencies recommended for use in laser printers.
• Make sure that the transparencies are not wrinkled or curled, and that they do not have
any torn edge.
• Hold the transparencies by the edges and avoid touching the print side. Oils from your
fingers that are deposited on the transparency can cause print quality problems.
• Be careful not to scratch the printer side or leave fingerprints on it.
1 1
Load the transparencies in the desired
input tray with the print side up and
the adhesive strip entering the
printer first.
Adjust the guide to fit the width of the
transparencies.
3 3
When you print on transparencies,
configure the paper source, type and
size in the software application. For
details, see page
5.3 .
Notes:
• To prevent transparencies from sticking
together, do not let the printed sheets stack
up as they are printed out.
• Place transparencies on a flat surface after
removing them from the printer.
2 2
Push the output lever down.