Samsung ML-1250 User Manual
Page 132

A
PPENDIX
Installing Optional Memory Card
7
Push the SIMM down until it snaps into
place.
Make sure that the SIMM is secured in
place by the metal clips and pins on
both sides of the connectors.
9
Reconnect the printer cable and the
power cord and turn the printer on.
Then, replace the supports.
8
Reassemble the shield cover, turn the
printer back over, and replace the toner
cartridge.
Pin
Metal clip
Note:
When you disassemble the
memory card, push out on the metal
clips at each end of the connector, and
pull it as shown.
A.33
This manual is related to the following products: