Envelopes, Paper specifications – Samsung ML-1250 User Manual
Page 106
A
PPENDIX
A.7
Envelope construction is critical. Envelope fold lines can vary
considerably, not only between manufacturers, but also within
a box from the same manufacturer. Successful printing on
envelopes depends upon the quality of the envelopes. When
selecting envelopes, consider the following components:
• Weight: The weight of the envelope paper should not exceed
90 g/m
2
(24 lb) or jamming may occur.
• Construction: Prior to printing, envelopes should lie flat with
less than 6 mm (0.25 in.) curl, and should not contain air.
• Condition: Envelopes should not be wrinkled, nicked, or
otherwise damaged.
• Temperature: You should use envelopes that are compatible
with the heat and pressure of the printer.
• Size: You should use only envelopes within the following size
ranges.
Minimum
Maximum
216 X 356 mm
(8.5 X 14 in.)
76 X 127 mm
(3 X 5 in.)
95 X 127mm
(3.8 X 5 in.)
Automatic input
tray
Manual input tray
Note:
You may experience some paper jams when using any
media with a length of less than 127 mm (5 in.). This may be
caused by paper that has been affected by environmental
conditions. For optimum performance, make sure you are
storing and handling the paper correctly. Please refer to
“Printer and Paper Storage Environment” on page
Paper Specifications
Envelopes