Sanyo LNS-S03 - Manual (Page 9)

6 Use 2 Light-Block Sheets (provided with projector) corresponding with lens. (Refer to the Type No.
below.) Set 2 Light-Block Sheets through the lens.
Make sure the shape of Light-Block Sheets and be sure to set them as shown in the Fig. 6.
Fig-6
LIGHT BLOCK SHEETS
Make sure the sheets figure and
put on proper position.
-8-
NOTE:
● Be sure to set each Light-Block Sheets as shown in Fig-6.
● Make sure the mark (TOP and BACK) on Light-Block Sheets and set them properly.
Use light-block sheets Type No. TYPE FC1 (PART No. 610 284 2500)
TYPE FC2 (PART No. 610 284 2494)