Sony DVP-FX1 - Manual (Page 93)

Settings and Adjustments 93
Note
When you select “D-PCM, ” set Virtual Enhanced Surround (VES) to “OFF.”
Otherwise, the player will not output signals when you have made the connections
using an optical digital connecting cord.
x MPEG
Selects the MPEG audio signals to be output when you have made the
connections using an optical digital connecting cord.
• PCM: when the player is connected to an audio component lacking a built-
in MPEG decoder. If you play MPEG audio sound tracks, the player
outputs stereo signals when you have made the connections using an
optical digital connecting cord.
• MPEG: when the player is connected to an audio component having a
built-in MPEG decoder.
If the player is connected to an audio component lacking a built-in MPEG
decoder, do not set this. Otherwise, when you play the MPEG audio
sound track, a loud noise will come out from the speakers, affecting your
ears or causing the speakers to be damaged.
Note
The player outputs the MPEG analog audio sound only from the front speakers when
you set “MPEG” to “MPEG.”
x DTS
Selects the DTS signals to be output when you have made the connections
using an optical digital connecting cord.
• OFF: when the player is connected to an audio component lacking a built-
in DTS decoder.
• ON: when the player is connected to an audio component having a built-
in DTS decoder.
If the player is connected to an audio component lacking a built-in DTS
decoder, do not set this. Otherwise, when you play the DTS sound track, a
loud noise will come out from the speakers, affecting your ears or causing
the speakers to be damaged.