Sony DVP-FX1 - Manual (Page 24)

24 Getting Started
5.1 Channel Surround Hookups (continued)
AUDIO SETUP
AUDIO DRC:
DOWNMIX:
DOLBY DIGITAL:
To set, press , then .
To quit, press .
STANDARD
DOLBY SURROUND
DOLBY DIGITAL
DIGITAL OUT
MPEG:
DTS: MPEG
ON C
B
A
ENTER
DISPLAY
Setups for the player
Some setup adjustments ar e necessar y for the player depending on the
components to be connected.
Use the setup display to change the various settings.
For details on using the setup display , see page 76.
• When you connect an audio component with a built-in Dolby Digital
decoder A
Select “DOLBY DIGITAL” under “DIGITAL OUT” in the “AUDIO
SETUP” display and set “DOLBY DIGITAL” to “DOLBY DIGIT
AL.”
(page 92)
• When you connect an audio component with a built-in MPEG decoder B
Select “MPEG” under “DIGITAL OUT” in the “AUDIO SETUP” display
and set “MPEG” to “MPEG.” (page 93)
• When you connect an audio component with a built-in DTS decoder C
Select “DTS” under “DIGITAL OUT” in the “AUDIO SETUP” display and
set “DTS” to “ON.” (page 93)
Notes
• When you do not connect an audio component with a built-in Dolby Digital
decoder, do not set “DOLBY DIGIT AL” to “DOLBY DIGIT AL.”
• When you do not connect an audio component with a built-in MPEG decoder ,
do not set “MPEG” to “MPEG.”
• When you do not connect an audio component with a built-in DTS decoder , do
not set “DTS” to “ON.”