Woodstock SHOP FOX W1747 - Manual (Page 16)

-14-
W1747 20" Planer
SE
T
U
P
To install the handwheel, do these steps:
1. Place the bushing on the handwheel shaft.
2. Insert the key into the shaft keyway.
3. Thread the handle into the handwheel.
4. Place the handwheel on the shaft and secure it with
the M12-1.75 hex nut and flat washer, as shown in
Figure 6.
Handwheel
Main Power
Switch
Dust Hood
To install the dust hood, do these steps:
1. Attach the dust hood to the planer with six M6-1 x
12 cap screws and flat washers as shown in Figure
7.
2. Attach the dust hood to the dust collector.
Note: To maximize work results and minimize clog-
ging, chipout, etc., use a dust collector with your
planer!� �
During the next step, DO NOT attach the dust hood
if you do not intend to connect your planer to a
dust collection system. Accumulated wood chips
could cause a malfunction, resulting in personal
injury or damage to the planer.
Figure 6. Installing handwheel on shaft.
Figure 7. Dust hood attached.