Sony BDV-L800 - Manual (Page 55)

O
th
e
r O
p
era
tions
55 GB
Further Settings for the
Wireless System
You can specify the wireless connection to link
the main unit to the subwoofer using the Secure
Link function.
This function can help prevent interference if
you use multiple wireless products or your
neighbors use wireless products.
1
Press HOME.
The home menu appears on the TV screen.
2
Press C/c to select [Setup].
3
Press X/x to select [System Settings],
then press .
4
Press X/x to select [Wireless Sound
Connection], then press .
The [Wireless Sound Connection] display
appears.
5
Press X/x to select [Secure Link], then
press .
6
Press X/x to select [On], then press
.
To cancel the Secure Link function, select
[Off].
7
Press SECURE LINK on the rear of the
subwoofer.
Proceed to the next Step within a few
minutes.
8
Press C/c to select [Start], then press
.
To return to the previous display, select
[Cancel].
9
After the message [Secure Link setting
is complete.] appears, press
.
The subwoofer is linked to the main unit
and the LINK/STANDBY indicator turns
orange.
If the message [Cannot set Secure Link.]
appears, follow the on-screen messages.
To cancel the Secure Link
function
For the main unit
Select [Off] on Step 6 above.
For the subwoofer
Press and hold SECURE LINK on the rear of the
subwoofer until the LINK/STANDBY indicator
turns green or flashes green.
If you use multiple wireless systems, such as a
wireless LAN (Local Area Network) or
Bluetooth, the wireless signals may be unstable.
In this case, the transmission may be improved
by changing the following [RF Channel] setting.
1
Press HOME.
The home menu appears on the TV screen.
2
Press C/c to select [Setup].
3
Press X/x to select [System Settings],
then press .
4
Press X/x to select [Wireless Sound
Connection], then press .
The [Wireless Sound Connection] display
appears.
5
Press X/x to select [RF Channel], then
press .
6
Press X/x to select the desired setting,
then press .
Activating wireless
transmission between specific
units
[Secure Link]
If wireless transmission is
unstable
[RF Channel]