Sony BDV-L800 - Manual (Page 48)

48 GB
To change the preset number
Select the desired preset number by pressing
PRESET +/–, then perform the procedure from
Step 3.
1
Press FUNCTION repeatedly until “FM”
appears in the front panel display.
The last received station is tuned in.
2
Press PRESET +/– repeatedly to select
the preset station.
The preset number and frequency appear on
the TV screen and front panel display.
Each time you press the button, the system
tunes in one preset station.
• You can select the preset station number directly
by pressing the number buttons.
Using the Radio Data
System (RDS)
(European models only)
The Radio Data System (RDS) is a broadcasting
service that allows radio stations to send
additional information along with the regular
program signal. This tuner offers convenient
RDS features, such as station name display.
The station name appears on the TV screen as
well.
Simply select a station from the FM band.
When you tune in a station that provides RDS
services, the station name* appears in the front
panel display.
* If an RDS broadcast is not received, the station
name may not appear in the front panel display.
• RDS may not work properly if the station you are
tuned to is not transmitting the RDS signal properly,
or if the signal strength is weak.
• Not all FM stations provide RDS service, nor do they
provide the same type of services. If you are not
familiar with the RDS system, check with your local
radio stations for details on RDS services in your
area.
• While receiving an RDS broadcast, each time you
press DISPLAY, the display in the front panel display
changes as follows:
Station name
t Frequency t Preset number t
Stream information t Station name t …
Selecting the preset station
What is the Radio Data
System?
Receiving RDS broadcasts