Southbend Turn-Nado EVS w/DRO SB1042PF - Manual (Page 8)

-6-
For Machines Mfg. Since 3/11 Turn-Nado ® EVS Lathes I N T R O D U C T I O N
Control Panel
G. Tachometer Display: Displays the current
spindle speed in RPM's.
H. Spindle Speed Dial: Electronically varies
the spindle speed within the selected spindle
speed range.
I. Power Light: Illuminates when lathe controls
are receiving power.
J. Coolant Pump Switch: Controls the coolant
pump motor.
K. Jog Button: Turns the spindle motor ON
while being pressed and held.
L. STOP Button: Stops all machine functions.
Twist clockwise to reset.
Figure 4. Control panel.
L
K
J
I H G
M. Carriage Handwheel: Moves the carriage
along the bed. Can be disengaged during
power feed operations to prevent an
entanglement hazard.
N. Cross Slide Handwheel: Moves the cross
slide toward and away from the workpiece.
O. Compound Rest Handwheel: Moves the tool
toward and away from the workpiece at the
preset angle of the compound rest.
P. 4-Way Tool Post: Mounts up to four cutting
tools at once that can be individually indexed
to the workpiece.
Q. Coolant Flow Control Lever: Controls the
flow of coolant from the nozzle.
R. One-Shot Oiler: Draws oil from the apron
reservoir to lubricate the carriage ways
through various oil ports.
S. Half Nut Lever: Engages/disengages the half
nut for threading operations.
T. Carriage Lock: Secures the carriage in place
when the carriage should not move.
Carriage
M
O
Figure 5. Carriage controls.
N
P
T
U
Q
R
S
W
X
Y
V