Recording a program, Checking the disc status while recording – Sony RDR-GX310 User Manual
Page 31

31
Se
ve
n B
a
si
c O
p
e
rat
ion
s
— G
e
tt
in
g
t
o
Kn
o
w
Yo
u
r DVD Re
c
o
rd
e
r
2. Recording a Program
This section introduces the basic operation to
record the current TV program to a disc (DVD).
For an explanation of how to make timer
recordings, see page 40.
1
Insert a recordable DVD.
See “Inserting a Disc” on page 29.
2
Press CH +/– to select the channel or input
source you want to record.
3
Press REC MODE repeatedly to select the
recording mode.
Each time you press the button, the display on
the TV screen changes as follows:
For more details about the recording mode,
see page 40.
4
Press
z REC.
Recording starts.
Recording stops automatically after 8 hours of
continuous recording or when the DVD is full.
To stop recording
Press
x REC STOP located beneath the remote
control cover.
Note that it may take a few seconds for recorder to
stop recording.
To pause recording
Press
X REC PAUSE located beneath the remote
control cover.
To restart recording, press the button again.
To watch another TV program while recording
Set your TV to the TV input using the TV/VIDEO
button (page 20).
z Hint
If you do not want to watch TV while recording, you can
turn off the TV. When using a decoder, make sure to
leave it on.
b
Notes
• After pressing
z
REC, it may take a short while to
start recording.
• You cannot change the recording mode while
recording or during recording pause.
• If there is a power failure, the program you are
recording may be erased.
• You cannot watch a TV program while recording
another TV program.
You can check the recording information such as
recording time or disc type.
Press DISPLAY twice during recording.
The recording information appears.
A Disc type/format
B Recording status
C Recording mode
D Recording time
Press DISPLAY to turn off the display.
+
RW
-RW
VR
-RW
Video
-
R
+
R
1
2
3
4
6
7
8
9
0
5
CH +/–
REC MODE
x REC STOP
z REC
TV/VIDEO
X REC PAUSE
DISPLAY
HQ
SP
HSP
LSP
SEP
EP
SLP
LP
Checking the disc status while
recording