JVC GR-D390EK - Manual (Page 29)

EN
29
DIG
IT
A
L STILL C
A
MERA
(D
.S.C
.)
RECOR
D
IN
G & P
L
A
YBACK
ADDITIONAL FEATURES FOR D.S.C.
By resetting the file name, a new folder will be
made. The new files you are going to make will
be stored in the new folder. It is convenient to
separate the new files from previously made
files.
1
Perform steps 1 – 3 in “Normal Playback Of
Images” (
੬ pg. 28).
2
Press MENU. The Menu Screen appears.
3
Press , , or to select “NO.
RESET”, and press SET. The NO. RESET
screen appears.
4
Press or to select “EXECUTE”, and
press SET. The new folder (such as
“101JVCGR”) will be made and the file name of
the next shot starts from DVC00001.
NOTE:
If the file name reaches DVC09999, a new folder
(such as “101JVCGR”) will be made and the file
name will start again from DVC00001.
The Protect mode helps prevent the accidental
erasure of files.
1
Perform steps 1 – 3 in “Normal Playback Of
Images” (
੬ pg. 28).
2
Press MENU. The Menu Screen appears.
3
Press , , or to select “PROTECT”,
and press SET. The PROTECT Menu appears.
To protect the currently displayed file
4
Press or to select
“CURRENT”, and press
SET or
. The PROTECT
screen appears.
5
Press or to select
the desired file.
6
Press or to
select “EXECUTE”, and
press SET.
● To cancel protection,
select “RETURN”.
● Repeat steps 5 and 6 for
all files you want to
protect.
To protect all files stored in the memory card
4
Press or to select “PROT.ALL”, and
press SET or . The PROTECT screen
appears.
5
Press or to select “EXECUTE”, and
press SET.
● To cancel protection, select “RETURN”.
NOTES:
● If the “
” mark appears, the currently displayed
file is protected.
● When the memory card is initialised or corrupted,
even protected files are deleted. If you do not want
to lose important files, transfer them to a PC and
save them.
Resetting The File Name Protecting Files