Playback using the remote control, Installing the battery, Beam effective area (indoor use) – JVC GR-D390EK User Manual
Page 25: Buttons and functions, Video playback
EN
25
VIDEO PLAYBACK
The Full-Function Remote Control Unit can
operate this camcorder from a distance as well
as the basic operations (Playback, Stop, Pause,
Fast-Forward and Rewind) of your VCR. It also
makes additional playback functions possible.
(
Installing The Battery
The remote control uses
one lithium battery
(CR2025).
1
Pull out the battery
holder by pushing the lock
tab.
2
Insert the battery in the
holder, and be sure to
have the “+” mark visible.
3
Slide the holder back in until you hear a click.
Beam Effective Area (indoor use)
When using the remote
control, be sure to point it
at the remote sensor.
The transmitted beam’s
approximate effective
distance for indoor use is
5 m.
NOTE:
The transmitted beam may not be effective or may
cause incorrect operation when the remote sensor
is directly exposed to sunlight or powerful lighting.
Buttons And Functions
A
Infrared beam transmitting window
● Transmits the beam signal.
The following buttons are available only when
the camcorder’s Power Switch is set to “PLAY”.
B
PAUSE Button
● Pauses the tape (੬ pg. 26)
Up Button (
C
SLOW Rewind Button (
D
REW Button
● Rewind/Reverse Shuttle Search on a tape
● Displays previous file in a memory card
Left Button (
E
INSERT Button (
F
SHIFT Button (
G
DISPLAY Button (
H
SLOW Forward Button (
I
PLAY Button
● Starts Playback of a tape (੬ pg. 23)
● Starts Auto Playback of images in a memory
card (
J
FF Button
● Forward/Forward Shuttle Search on a tape
● Displays next file in a memory card (੬ pg. 28)
Right Button (
K
A. DUB Button (
L
STOP Button
● Stops the tape (੬ pg. 23)
● Stops Auto Playback (੬ pg. 28)
Down Button (
M
EFFECT Button (
N
EFFECT ON/OFF Button (
The following buttons are available when the
camcorder’s Power Switch is set to “REC”.
o
Zoom (T/W) Buttons
Zoom in/out (
(Also available with the Power Switch set to
“PLAY”)
p
START/STOP Button
Functions the same as the Recording Start/
Stop Button on the camcorder.
q
S.SHOT Button
Functions the same as SNAPSHOT on the
camcorder.
(Also available with the Power Switch set to
“PLAY”)
Playback Using The Remote
Control
1
1
2
3
Lock tab
Remote sensor