Sony SGPT11 - Manual (Page 31)

5. Place the tablet device in the upper slot of the cradle.
6. Make sure the charge indicator is lit.
Note
When you hold or unplug the AC adapter, do not touch its terminal area.
Pulling the cable of the AC adapter forcedly when unplugging it from the cradle may break the AC adapter or cradle. So, be sure
to hold the foot of the cradle.
When using the cradle foot at its lower position, run the AC adapter cord through the cutout of the cradle foot to prevent the
cradle from falling over.
When placing your tablet device in the cradle while the strap attached, make sure the strap does not get caught between the
tablet device and the cradle.
Hint
When you set your tablet device in the cradle for the first time, you will be prompted to select which application you want to start
when using the cradle. If you check [Use by default for this action] and select an application, the selected application will start the
next time you set your tablet device in the cradle.
To return to the default setting, tap [ Apps] - [ Settings] - [ Applications] - [Manage applications] - (the application that
is selected to start automatically). On the displayed application management screen, tap [Clear defaults]. The setting will be
cleared.
Removing your tablet device from a cradle
Lift your tablet device up in a straight line.