Sangean DCR-200 - Manual (Page 32)

31
Egg timer function
1. Press and release the Egg timer button to enter timer setting and
rotate the Tuning control to adjust the minute setting during 1 and
120 minutes with 1 minute interval.
2. Press and release the Tuning control to finish the setting and the egg
timer will start to countdown, meanwhile the display will show the
remaining minutes. The countdown display will become normal
display after 10 seconds.
3. Press and release the Egg timer button to view the remaining time
for an active timer setting. To cancel the function when countdown
is progressing, press and hold the Egg timer button until the Egg
timer indicator disappears.
4. Rotate the Tuning control while the display shows the remaining time
of countdown to adjust the required timer setting again.
Note:
the digital receiver will sound for 3 minutes when an active timer finishes
its countdown.
2,3