Sangean DCR-200 User Manual

Page 13

Selecting a DAB radio station
1. Press the Standby button to switch on your digital receiver.
The display will show “TUNING” for a few seconds.

2. Press the Band button to select DAB radio mode. The display
normally shows the name of the current station selected.

3. Rotate the Tuning control to access the radio station list and to scroll
through the list of available stations. Stop rotating the Tuning control
when you find the station that you wish to hear.

4. Press and release the Tuning control to cause the digital receiver to
tune to the chosen station. The display may show “TUNING” while
your digital receiver finds the new station.

5. Adjust the Volume control to set the sound level as needed.

Secondary services
1. Certain radio stations have one or more secondary services
associated with them. If a station has a secondary service associated
with it then the secondary service will then appear immediately after
the primary service as you rotate the Tuning control.

2. Most secondary services do not broadcast continually and if the
selected service is not available, the radio will re-tune to the
associated primary service.

3,4