Samsung CLX-8380ND - Manual (Page 95)

11.8
4 Push the lock lever up and pull the waste toner container out.
Note
When you pull out the waste toner container out of the
machine, move the container carefully not to drop it from
your hands.
Make sure that you lay the waste toner container on a flat
surface so that the toner does not spill.
5 Remove the container’s cap from the container as shown below,
and use it to close the waste toner container openings.
Caution
Do not tilt or turn over the container.
6 Take a new waste toner container out of its package.
7 Insert the new container into position and then push it to make sure
that it is firmly seated in place.
8 Close the front cover, then the side cover.
9 Make sure that the cover is securely latched and then turn the
machine on.
Caution
If the cover is not completely closed, the machine will not
operate.
Maintenance Parts
To avoid print quality and paper feed problems resulting from worn parts
and to maintain your machine in top working condition the following items
will need to be replaced after the specified number of pages or when the
life span of each item has expired.
We highly recommend that this maintenance be performed by an
authorized service provider, dealer or the retailer where you bought the
machine. The warranty does not cover the replacement of the
maintenance parts after their lifespan.
Items Part Name Yield (Average)
Transfer belt unit Cartridge-transfer Approx.
100,000 images
Transfer roller
(T2) MEA unit-TR(2) Approx. 100,000
pages
Fuser unit ELA unit fuser Approx. 100,000
pages
DADF rubber pad RMO-ADF rubber Approx. 50,000
pages
DADF feed roller MEA-ADF roller Approx. 200,000
pages
Multi-purpose tray
rubber pad MEA unit-holder pad Approx. 50,000
pages
Guide exit duplex MEA unit_exit duplex Approx. 100,000
pages
Paper feed roller MEA unit-roller PU Approx. 100,000
pages
Pickup roller ELA HOU-MP pickup Approx. 100,000
pages