Sunrise Medical F45 - Manual (Page 15)

11 F45 Issue 6
Dedocking
Fig. 9
Fig.10
Refitting motor drive units
1. To refit the motor drive units
ensure the 6 pin plug power
connectors are free.
2. Tilt and lift the locating tongue
under the dedocking socket.
Lower the chair until the
dedocking trigger clicks into
position (Fig. 9).
4. Reconnect the motor drive unit 6
pin power plugs.
5. Fit the battery basket and the
batteries, ensuring that the
batteries are correctly secured
with the retaining straps.
6. Connect the batteries with the
connection plug, slide the battery
basket into its forward postion,
ensuring that it locks positively
over its location studs and finally
connect the 6 pin power plug to
the rear battery socket (Fig 10).
7. Ensure the freewheel levers are
in the drive position.
6 pin connector
Battery
connection
plug
Ensure the levers are
in the drive position