Smart Technologies SBID Interactive Display 6052i - Manual (Page 30)

22 | CHAPTER 4 – USING THE INTERACTIVE DISPLAY
Turning the Interactive Display On and Off
Turning On the Interactive Display
To turn on the
interactive display
1. Set the interactive display’s main power switch to on. This is on the terminal
panel, see page 2.
2. Press the power button on the control panel.
OR
Press the power button on the remote control.
3. Turn on the computer.
Turning Off the Interactive Display
To turn off the
interactive display
1. Turn off your computer.
2. Press the power button on the control panel.
OR
Press the power button on the remote control.
3. Set the LCD monitor’s main power switch to off. This is on the terminal panel, see
page 2.
Using Power Management
The LCD monitor follows the VESA approved Display Power Management (DPM)
function.
Power management is an energy-saving function that enables your LCD monitor to
automatically enter a power-saving mode if you haven’t used the keyboard or the
mouse for a fixed period. This reduces the power consumption of the LCD monitor
and potentially increases the life of the interactive display.
If your LCD monitor enters power-saving mode, you can turn it on at any time by
touching the screen.