SATO MB400 User Manual
Page 9
Control Code
STX (02H), ETX (03H), ACK (06H), NAK (15H)
Error Control
Method
Response Check
MB400
Quick
Guide
Pg
13
Adjusting the Position of the Label Sensor
1. Moving the label Sensor to the Right.
Turn the Label Sensor Adjustment Dial up.
2. Moving the Label Sensor to the Left.
Turn the Label Sensor Adjustment Dial down.
Using the Sensor
Align the right edge of the sensor with the right edge of
the label.
MB400
Quick
Guide
Pg
6
No. Items
Details
1
Label sensor
Adjust this to the label size used
2
Label sensor adjustment dial
Use this to adjust the location of the
label sensor
3
Label guide
Adjust this to the label size used.
4
O ring
Use this ring when fixing the label
guide
5
Shoulder belt hook
Attaches the shoulder belt when
hanging the printer on shoulder.
6 Adjustment
screwdriver
(Supplied
accessory)
7
IrDA filter
Location of IrDA receiving element
8
IrDA adjustment lever
Changes the angle of the IrDA
receiving element.
9
Interface cover
Covers the interface connector
10
Interface connector (RS232C)
Connects to a computer
11
DC input jack cover
Covers the DC input jack when not in
use
12
DC input jack
Connects the AC adapter