SATO MB400 User Manual

Page 10

MB400

Quick

Guide

Charging the Battery Pack

You can recharge the battery pack by inserting into the battery charger.

1. Plug one end of the AC adapter into the battery charger and the other end into the

wall outlet.

2. Insert the battery pack. Make sure the connector on the battery pack is facing down

and insert into the charger.

• The CHARGE indicator lights up in red when charging starts.

• The CHARGE indicator lights up in green when charging is completed.

(Fully charged)

3. When charging is completed, remove the battery pack from the charger.

MB400

Quick

Guide

[Dispense Mode]

First perform the previous Steps 1 to 6.

• Pick the Dispense/Continuous switch lever

from both sides and slide the Dispenser unit to
the direction of the arrow.

• Leave more than 30mm of the label out for the

Dispense mode.

• Slide the Dispenser unit until it is set in place.