Siemens optipoint 200 - Manual (Page 7)

7
Gigaset 200, GBR, A31008-G200-B101-1-7619 VORBEREI.FM 28.09.01
Step 2: Put the handset into operation
Inserting the batteries
● Insert the batteries with the correct polarity – see
figure.
● Put the lower end of the battery compartment cover
in position (see arrow), and press against the
_ribbing at the top until it engages.
● To open it, lift the cover by the ribbing.
● Use only the plug-in power supply unit
provided
, as indicated on the bottom of
the base unit.
● Important: new phone cable. Use only the
enclosed cable type.
● If you purchase another cable, ensure that it
has the correct connector pin assignment.
The display is protected by a plastic foil.
Please remove the protective foil.
● Use only approved, rechargeable batter-
ies of the same type
. Otherwise you risk
damaging your health and the product.
● Do not use charging units belonging to
other devices because they could damage
the batteries.
!
+
– +
–
+
–
+
– +
–
+
–
!