Siemens optipoint 200 - Manual (Page 19)

19
Gigaset 200, GBR, A31008-G200-B101-1-7619 BASISST.FM 28.09.01
Pulse/no-pulse ratio
This function changes the pulse/no-pulse ratio (for
pulse signaling).
Press the off-hook key.
Open the menu.
3
PULSE PAUSE Select and confirm.
3
2 - 1 Select and confirm the desired
pulse/no-pulse ratio.
Press the on-hook key.
Deactivating and reactivating automatic
attenuation equalization
*
If a device is delivered with automatic attenuation
equalization, automatic attenuation equalization is
always activated on delivery and should (normally)
remain activated.
Automatic attenuation equalization can be deactivated
in the following exceptional case: when your base
unit is connected to a telephone system.
Press the off-hook key.
Open the menu.
3
AGC Select and confirm.
AGC OFF Select and confirm.
or
3
AGC ON Select and confirm.
Press the on-hook key.
* Not available in all countries