Sharp AQUOS 09P09-MX-NM - Manual (Page 46)

44
Problem Possible Solution
No picture • Is connection to other components correct? Pages 11, 12, 13, 14 and 35
Is correct input signal source selected after connection? Page 29
Is the correct input selected? Page 16
Is "On" selected in "Audio Only"? Page 29
• If the PC image is not displayed, check the following:
- When connecting a laptop PC to the TV, check that display output mode of the
PC is set to external monitor.
- Check the resolution setting on the PC. Is a non-compatible signal being input?
Page 40
•
•
•
•
The TV sometimes makes a
cracking sound. • This is not a malfunction. This happens when the cabinet slightly expands and
contracts according to change in temperature. This does not affect the TV's
performance. •
Troubleshooting-Digital Broadcasting
The error message about reception of broadcast
The example of an error message
displayed on a screen
Error code Possible Solution
Failed to receive broadcast. • E202 Check the antenna cable. Check that the antenna is correctly
setup. •
No broadcast now. • E203 Check the broadcast time in the program guide. •
Cautions regarding use in high and low temperature environments
When the unit is used in a low temperature space (e.g. room, offi ce), the picture may leave trails or appear slightly delayed.
This is not a malfunction, and the unit will recover when the temperature returns to normal.
Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a
heater, as this may cause the cabinet to deform and the Liquid Crystal panel to malfunction.
Storage temperature:
f4°F to e140°F (f20°C to e60°C)
•
•