Sharp AQUOS 09P09-MX-NM - Manual (Page 33)

31
Digital Setup Menu
This setting allows you to optimize the settings of
Digital broadcasting.
Identification
Audio Setup
Software Update
[PCM]
Digital Setup
Example
On-Screen Display Menu
Software Update
This function allows software updates by inserting a
USB memory device with the update fi le into the
SERVICE terminal on the TV.
To check for the availability of a software update, visit
www.sharpusa.com. If you have any questions, please
call 1-800-BE-SHARP (800-237-4277).
CAUTION
• Do not remove the USB memory device or unplug
the AC cord while the software is being updated.
• Be sure to properly follow the whole procedure
described below, step by step. Otherwise, for
example, the TV cannot read the data in the USB
memory device and software updating will fail.
Insert the USB memory device with the update fi le
into the SERVICE terminal on the TV. 1
Press MENU to display the MENU screen, and
then press
c/d to select “Digital Setup”.
2
Press a/b to select “Software Update”, and then
press ENTER.
• If you have already set the Secret No., go to step 4.
Audio Setup
Software Update
Identification
[PCM]
Digital Setup
3
Input the 4-digit secret number by using 0–9.
Digital Setup
Secret No. a a a a
4
1 Press MENU to display the MENU screen, and then
press c/d to select "Digital Setup".
2 Press a/b to select a specifi c adjustment item,
and then press ENTER.
3 Press a/b (or c/d) to select the desired setting,
and then press ENTER.
4 Press MENU to exit.
Audio Setup
You can output digital audio to an AV amplifi er or
similar device whose DIGITAL AUDIO INPUT terminal
is connected to the DIGITAL AUDIO OUTPUT terminal
on the TV. Please select an audio output format
compatible with the audio format of the program you
are watching and the equipment connected.
PCM: The optical output terminal outputs audio signal
in PCM form. If your digital audio system does not
support Dolby Digital, select "PCM".
Dolby Digital: The optical output terminal outputs audio
signal in Dolby Digital form. It reproduces sound from
surround program of digital.
Identifi cation
The current version of the TV software is displayed.