Sharp AQUOS 09P09-MX-NM - Manual (Page 24)

22
On-Screen Display Menu
OPC Setting
Automatically adjusts the brightness of the screen.
Off: The brightness is fi xed at the value set in "Backlight".
On: Automatically adjusts.
On: Display: Displays the OPC effect on the screen while
adjusting the brightness of the screen.
• When set to "On", the Optical Picture Control (OPC)
senses the surrounding light and automatically adjusts
the backlight brightness. Make sure nothing obstructs
the OPC sensor, which could affect its ability to sense
surrounding light.
• When set to "On: Display", OPC effect displays on the
screen while the OPC adjusts the screen brightness.
• When set to "On" or "On: Display", the OPC indicator on
the TV lights green.
Advanced Picture Setting
This TV provides various advanced functions for
optimizing the picture quality.
C.M.S.
(Color Management System)
Color tone is managed using the six-color adjustment
setting.
C.M.S.-Hue: This is a standard to adjust the color either
more reddish or more bluish in tone.
C.M.S.-Saturation: Increases or decreases the
saturation of a selected color.
C.M.S.-Value: A higher value makes the image brighter.
A lower value makes the image darker.
• For resetting all adjustment items to the factory preset
values, press
a/b to select "Reset", and then press
ENTER.
Color Temp.
(Color Temperature)
For a better white balance, use color temperature
correction.
High: White with bluish tone
Mid-High:
Middle:
Mid-Low:
Low:
White with reddish tone
White balance can be adjusted between a maximum of
+30 and a minimum of –30 for each color temperature.
R Gain (LO/HI): –30 through +30
G Gain (LO/HI): –30 through +30
B Gain (LO/HI): –30 through +30
• For resetting all adjustment items to the factory preset
values, press
a/b to select "Reset", and then press
ENTER.
Picture Menu
Adjusts the picture to your preference with the
following picture settings.
Picture
Contrast
OPC
Brightness
Color
Tint
Sharpness
Advanced
Reset
[ b30]
[ 0]
[ 0]
[ 0]
[ b2]
0
a30
a30
a30
a10
b40
b30
b30
b30
b10
Backlight [ b12] a16 b16
Off On On : Display
Example
1 Press MENU to display the MENU screen, and then
press c/d to select "Picture".
2 Press a/b to select a specifi c adjustment item.
Select "Advanced" and then press ENTER to set
"C.M.S.-Hue", "C.M.S.-Saturation", "C.M.S.-Value",
"Color Temp.", "Fine Motion Enhanced", "Active
Contrast", "Gamma Adjustment", "Black Level",
"Film Mode", "Digital Noise Reduction", "3D-Y/C",
"Monochrome" or "Range of OPC".
3 Press a/b(or c/d) to select the desired setting,
and then press ENTER.
4 Press MENU to exit.
Selected item cbutton dbutton
Backlight The screen dims The screen
brightens
Contrast For less contrast For more contrast
Brightness For less
brightness For more
brightness
Color For less color
intensity For more color
intensity
Tint Skin tones
become reddish Skin tones
become greenish
Sharpness For less
sharpness For more
sharpness
• For resetting all Picture adjustment items to the factory
preset values, press
a/b to select "Reset", press ENTER,
press c/d to select "Yes", and then press ENTER.
•