Sharp AQUOS 09P09-MX-NM - Manual (Page 22)

20
ENTER : Select : Enter MENU : Exit RETURN : Back
1 Item displayed in yellow
• This indicates the item currently selected.
• Press ENTER to go to the adjustment screen for this
item.
2 Item in brackets
• This indicates the current setting for the item.
3 Item displayed in white
• This indicates that the item can be selected.
4 Item displayed in gray
• This indicates that the item cannot be selected.
There are various reasons why the items cannot be
selected, but the main reasons are as follows:
—Nothing is connected to the selected input terminal.
—The function is not compatible with the current input
signal.
1 Press c/d to select the desired item.
2 Press a/b to select the desired item.
3 Press c/d to adjust the item.
On-Screen Display Menu
On-Screen Display Menu Operation
MENU: Press to open or close the menu screen.
a/b/c/d: Press to select a desired item on the screen or
adjust a selected item.
ENTER: Press to go to the next step or complete the
setting.
RETURN: Press to return to the previous step.
The bar above is an operational guide for
the remote control. The bar will change in
accordance with each menu setting screen.
Example
Menu Operation Buttons
Using the control panel of the main unit
You can also operate the menu with the control panel
of the main unit.
Button operations on the control panel correspond to
the ones on the remote control as shown below. Using the remote control
Use the following buttons on the remote control to
operate the menu.
MENU: MENU on the remote
control.
INPUT: ENTER on the remote
control.
CHr/s: Cursor a/b on the
remote control.
VOL k/l: Cursor c/d on the
remote control.
LCFONT:
• This product is embedded with LC Font technology, which was developed by SHARP Corporation for clearly displaying easy-
to-read characters on LCD screens.
• Menu options differ in the selected input modes, but the operating procedures are the same.
• The screens in the operation manual are for explanation purposes (some are enlarged, others cropped) and may vary slightly
from the actual screens.
LCFONT embedded
Picture
Contrast
OPC
Brightness
Color
Tint
Sharpness
Advanced
Reset
[ b30]
[ 0]
[ 0]
[ 0]
[ b2]
0
a30
a30
a30
a10
b40
b30
b30
b30
b10
Backlight [ b12] a16 b16
Off On On : Display
Example
Option
[No] Program Title Display
[Off] Clear Voice
Auto Volume
Favorite CH
[Off] Operation Lock Out
Demo Mode
[Yes] Channel Selecting Effect
Caption Setup
Digital Caption Info.
Audio Only
Output Select [Fixed]
AQUOS LINK Setup
PC Audio Select [Input 4 (PC)]
[Off]