Siemens ET 77..UC - Manual (Page 10)

10
ā
Operation
Power key
The power key turns on the electronics for the touch key panel. Your cooktop is now
ready to use.
Touch the @ symbol until the powerĆon lamp • and the - element indicators light
up.
Touch the @ symbol until the powerĆon lamp • and the - element indicators go out.
This turns off all the elements. The hot surface indicator stays on until the elements
have cooled sufficiently.
The cooktop turns off automatically once all of the elements have been off for more
than 20 seconds.
If the surfaces are still hot when the cooktop is turned back on, H/h an d - alternate
in the element indicator display.
Cooking
This section explains how to adjust the elements. In the table, you can find
temperature settings and cooking times for various foods.
Use the slider panel to select the desired temperature.
Heat setting 1 = lowest level
Heat setting 9 = highest level.
The temperature range is a continuous scale from 1 to 9. The level is indicated by a
number or a number with a decimal point after it (i.e., 2 or 2) 2 is halfway between
2 and 3.
The cooktop must be turned on.
1 2
1. Select the element by touching the O symbol. The temperature level display
flashes 0.
Turning power on
Turning power off
Notes
Slider panel
Set the cooking
temperature as follows: